SightLine ICD-4000-OEM, Manual

Page: 9 / 21

ICD-4000-OEM
© SightLine Applications, Inc. 7
5.5 Connector J8: USB 3.0 (Type-C)
Connector: Molex 1054500101 Mates with: USB Type-C Cable
Table 6: USB 3.0
Pin Description Pin Description
A1 GND B1 GND
A2 USB3_TX1_N B2 USB3_TX2_P
A3 USB3_TX1_N B3 USB3_TX2_N
A4 P5V B4 P5V
A5 CC1 B5 CC2
A6 USB3_P1_HS1_D_P B6 NA
A7 USB3_P1_HS1_D_N B7 NA
A8 NA B8 NA
A9 P5V B9 P5V
A10 USB3_RX2_N B10 USB3_RX1_N
A11 USB3_RX2_P A11 USB3_RX1_P
A12 GND A12 GND

USB 5V output can source 900mA max . 5V is also used for MIPI interface boards connected on J9
with a combined maximum of 1.2A.

CAUTION : Do NOT connect an external 5V power source to the USB-C connector. Damage to the OEM may
occur.
5.6 Connector J9: MIPI Port (FFC connector)
Connector: Hirose 28POS, FH41-28S-0.5SH(050) Mates with: Sightline Cable SLA-CAB-MIPI-02

The mating cycle rating for this connector is 20 cycles.
Table 7: MIPI Port
Pin Description Pin Description
2 D4+ 1 GND
4 GND 3 D4-
6 D3- 5 D3+
8 CLK+ 7 GND
10 GND 9 CLK-
12 D2- 11 D2+
14 D1+ 13 GND
16 GND 15 D1-
18 IO_HOST_OUT0 17 IO_HOST_OUT1
20 CCIO_I
2
C_SCL (I
2
C-3, 400 kHz) 19 GND
22 GND 21 CCIO_I
2
C _SDA (I
2
C-3)
24 IO_HOST_IN0 23 IO_HOST_IN1
26 VCC_5V 25 VCC_5V
28 GND 27 VCC_5V

Limit power supplied over FFC cable to 6.75 watts (1.35A @5V ).