ICD-4000-OEM
© SightLine Applications, Inc.
8
5.7
Connector J15: MicroSD
Push the microSD into place. To eject it push it again. The socket is rated up to 10,000 mating cycles
and has 3.3 mm card eject length.
Recommended microSD card types and previously tested models are discussed in the
5.8
Connector J16: HDMI Output Video (FFC connector)
Connector: Amphenol 20POS, 62674-201121ALF
Mates with: Sightline Cable SLA-CAB-HD10
Table 8: HDMI
Pin
Description
Pin
Description
2
HDMI_C_5VOUT
*
1
HDMI_C_5VOUT
*
4
HDMI_C_DATA
3
HDMI_C_HPD
6
HDMI_C_CEC
5
HDMI_C_CLK
8
GND
7
GND
10
HDMI_TMDS_CLK_C_P
9
HDMI_TMDS_CLK_C_N
12
HDMI_TMDS_TX0_C_N
11
GND
14
GND
13
HDMI_TMDS_TX0_C_P
16
HDMI_TMDS_TX1_C_P
15
HDMI_TMDS_TX1_C_N
18
HDMI_TMDS_TX2_C_N
17
GND
20
GND
19
HDMI_TMDS_TX2_C_P
*
Not intended for customer use.
Compliant with HDMI v2.0 output.
The HDMI output format is specified by the resolution and format specified through Panel Plus. The
HDMI output ignores any EDID HDMI format information in the external HDMI sink device. Supported
HDMI formats are defined in
5.9
Connector J25: Additional Serial / GPIO
Connector: Molex 8POS, 53398-0871
Mates with: Molex 8POS Housing, 51021-0800
Table 9: Extra Serial/GPIO
Pin
Signal
Description
1
GND
2
TX0
3.3V TTL
3
RX0
3.3V TTL
4
GND
5
TX3
3.3V TTL
6
RX3
3.3V TTL
7
GPIO6 (Linux GPIO_458)
GPIO
8
GPIO_125 (no software
interface)
Default MCU_PB3 open drain (Heater control). APQ_GPIO_125 optional w/ resistor
load for fan, etc.
