EAN-FLIR Cameras
© SightLine Applications, Inc.
17
4.
Send FFC:
51,AC,0D,3D,04,6E,00,00,0C,00,00,AA,DA,00,00,0B
▪
51,AC = header
▪
0D = length
▪
3D = command pass through
▪
04 = serial port 2
▪
6E ... 00 = Tau command
▪
0B = SLA checksum
Optional (before sending the FFC command):
•
FFC mode select manual:
51,AC,0F,3D,04,6E,00,00,0B,00,02,0F,08,00,00,00,00,64
•
FFC mode select auto:
51,AC,0F,3D,04,6E,00,00,0B,00,02,0F,08,00,01,10,21,5E
•
FFC mode select external:
51,AC,0F,3D,04,6E,00,00,0B,00,02,0F,08,00,02,20,42,10
Other commands (shown without header or checksum):
•
14-bit depth:
0F,3D,04,6E,00,00,12,00,02,d2,FA,06,00,AA,A6
•
8-bit depth:
0F,3D,04,6E,00,00,12,00,02,d2,FA,06,01,BA,87
•
14-bit unfiltered:
0F,3D,04,6E,00,00,12,00,02,D2,FA,06,03,9A,C5
•
Save parameters:
0D,3D,04,6E,00,00,01,00,00,E8,8B,00,00
7.1.2
3000-OEM Cam2 / Vin1 / Serial3
1.
Panel Plus main menu »
Configure
»
Serial Ports
.
2.
Set
Serial Port 3
to
57600
baud. Set the
Protocol
field to something other than
Port Not Used
.
3.
Go to
File
»
Send Command
.
4.
Send FFC:
51,AC,0D,3D,06,6E,00,00,0C,00,00,AA,DA,00,00,B8
▪
51,AC = header
▪
0D = length
▪
3D = command pass through
▪
06 = serial port 3
▪
6E ... 00 = Tau command
▪
B8 = SLA checksum
Optional (before sending the FFC command):
•
FFC mode select manual:
51,AC,0F,3D,06,6E,00,00,0B,00,02,0F,08,00,00,00,00,33
•
FFC mode select auto:
51,AC,0F,3D,06,6E,00,00,0B,00,02,0F,08,00,01,10,21,09
•
FFC mode select external:
51,AC,0F,3D,06,6E,00,00,0B,00,02,0F,08,00,02,20,42,47
See the Panel Plus User Guide for instructions on creating Macros for these commands.
