1 Install middle ring on the body. Proper installation is required.
2
Put the juice strainer into the middle ring and properly install it on the
motor wheel (before use, check whether the juice strainer is damaged
and, if it is, do not use the product and contact a designated service
center).
3 Install the pomace cup.
4
Put the header right above on the body and properly install it as per
the direction indicated on the header.
5
Put the pulling rod inside the two grooves of the header until
completely in place or the product will not work normally.
6
Allow the fruit juice cup baffle to slide in the juice cup along the neck.
Put on the cup cover.
7 Put juice cup under the outlet.
8
Align the groove of the pushing rod with the flange inside the feeding
port and put the pushing rod inside the feeding port.
9
Connect the power supply. (M ake sure the switch is off before
connecting the power supply).
10
Clean fruits and vegetables and cut them into blocks suitable for the
food material inlet (remove hard seeds, shells, or thick skins of the
fruits and vegetables, if any, first).
11 Activate the switch, start working with working time
≤
1min.
12 Put the prepared fruit and vegetables in the feeding port.
