SIFA - QUAD B-30, User Manual, Page: 45 / 154

45
GB
2.9 FITTING THE ENDPANELS
- Fit the end panel (Fig. 18, pos. A), fixing the pins into the corresponding holes (Fig. 18, pos. B).
- Put the end side ajar and tighten the M6 TCEI screws (fig. 18 pos. C).
- Tighten the beads (fig 18b, pos D).
- Connect the glass side panels ( fig.19, pos. E) to
the electricity supply and slot them into position
(fig. 19, pos. F) .
NOTE! Fit the glass side panels with the
electrified track facing outwards.
Fig.18b
Fig.19
D
E
E
F F
F F
Fig.18
A
B
C