background image

California Prop 65 Warning: This product can expose you
to  chemicals  including  glass  wool  fiber  and  carbon
monoxide  which  the  State  of  California  has  determined
can cause cancer, birth defects, and other reproductive
h a r m .  

F o r  

m o r e  

i n f o r m a t i o n  

g o  

t o

www.P65Warnings.ca.gov 

SAFETY NOTICE

<

CAUTION:  HOT  WHILE  IN  OPERATION.  KEEP
CHILDREN, CLOTHING AND FURNITURE AWAY.
CONTACT MAY CAUSE SKIN BURNS.

<

IF THIS HEATER IS NOT PROPERLY INSTALLED,
A HOUSE FIRE MAY RESULT.

<

CONTACT LOCAL BUILDING OFFICIALS ABOUT
RESTRICTIONS AND INSTALLATION INSPECTION
REQUIREMENTS IN YOUR AREA.

<

FAILURE TO COMPLY WITH OWNERS' MANUAL
INSTRUCTIONS WILL VOID YOUR WARRANTY!

WARNING:  FOR  INSTALLATIONS  IN  MOBILE

HOMES, DO NOT INSTALL IN SLEEPING ROOM.

S2300 Wood Heater Manual

Installation and Operating

Instructions

Please read this entire manual before installation. Save these instructions.

GENERAL INFORMATION

Congratulations on your purchase of the Sierra Stove. We

are confident that your new stove will provide you with years

of safe, comfortable and efficient heating.

Your Sierra Stove is a free-standing/mobile home approved

wood fueled heating appliance tested to the ICBO TL-130 &

Canadian test ULC S627. Safety testing is according to UL'

1482 and UM 84. HUD standards.

This manual describes the installation and operation of the

Sierra S2300 wood heaters.

EMISSION CERTIFICATION STATUS

The S2300 model meets the U.S. Environmental Protection

Agency's  emission  limits  New  Source  2020,,  ASTM

E3053-2017 and EPA Alternate Test Method (ATM) 125 for

cordwood. Under specific test conditions this heater has been

shown to deliver heat at rates ranging from 11,000 to 45,500

Btu/hr capable of heating approximately 2,100-2,600 square

feet. Actual heat output and space heated is determined by:

climate, home construction, species and moisture content of

wood.

This wood heater has a manufacturer-set minimum low

burn rate that must not be altered. It is against federal

regulations to alter this setting or otherwise operate this

wood heater in a manner inconsistent with operating

instructions in this manual

Please read this entire manual before you install and use

your new room heater. Failure to follow instructions may

result in property damage, bodily injury, or even death.

Save these instructions for future reference.

SAFETY NOTICE

If this appliance is not properly installed, a house fire may

result. For your safety, follow the installation instructions. 

Check with local building or fire officials about restrictions

and installation inspection requirements in your area.

Installation into mobile homes require outside combustion

air and special hearth attachments. For Mobile Homes,  a

Combustion Air Kit P/N 11069 is available from your

dealer. 

It is best to have a professional install your Sierra Stove. If

you prefer to install it yourself (see Installation

Instructions), be sure to obtain the proper permits. Have

the local building officials inspect the stove and chimney

pipe for safety and code compliance after the installation is 

complete.

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE

SERVING ANOTHER APPLIANCE.

            

OVERALL DIMENSIONS

This  wood  heater  needs  periodic  inspection  and
repair  for  proper  operation.  It  is  against  federal
regulations to operate this wood heater in a manner
inconsistent  with  operating  instructions  in  this
manual.

PLEASE LEAVE THIS MANUAL WITH THE OWNER !!

Summary of Contents for S2300










Reviews: