Rev 3 9/21/17
54
41110479
E
E: Console Access
If you have two USB ports on your dev machine, you can use one of them to display the mangOH Red’s diagnostic
messages when the device boots, when certain commands are run, etc.
To set up a window to display diagnostic messages:
1.
Use a micro-USB cable to connect the mangOH Red’s CONSOLE USB port to a USB port on the dev
machine.
2.
Open a terminal window connected to the target’s Linux console as follows:
a.
Open Windows Device Manager, then expand Ports (COM &LPT) and check which COM port is used for
the USB Serial Port.
b.
Open a terminal window (e.g. PuTTY) connected to the mangOH Red’s console using the following
settings:
·
Connection type = Serial
·
Serial line = [USB Serial port COM port]
·
Speed = 115200
