Sierra Wireless AirPrime WP75 Series, At Command Reference

Page: 89 / 300

Modem Status, Customization, and Reset Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 89
!PCTEMPLIMITS Set/report temperature state limit values
Certain modem functionality is affected by the modem’s temperature state. The possible
temperature states are high critical, high warning, high normal, low normal, and low critical.
Use this command to report or set the limits that correspond to these temperature states.
To display the current temperature and temperature state, see
!PCTEMP on page 88.
Note: All temperatures are in Celsius.
Password required: Yes
Usage:
•
Execution: AT!PCTEMPLIMITS=<hc>,<hw>,<hn>,<ln>,<lc>
Response: OK
Purpose: Set the temperature limits for each state (all five values must be specified).
•
Query: AT!PCTEMPLIMITS?
Response: HI CRIT: <hc>
HI WARN: <hw>
HI NORM: <hn>
LO NORM: <ln>
LO CRIT: <lc>
Purpose: Return the temperature limits for each state.
Parameters:
Note: Minimum separation between threshold values is 4°C. (e.g. If <hc> = 120, <hw> must
be

116.)
<hc> (High Critical)
•
Temperature limit varies by device (see device Product Specification Document or
Product Technical Specification).
•
Default = 108
°
C.
<hw> (High Warning)
•
Temperature limit varies by device (see device Product Specification Document or
Product Technical Specification).
•
Default = 95
°
C.
<hn>(High Normal)
•
Temperature limit varies by device (see device Product Specification Document or
Product Technical Specification).
•
Default = 85
°
C.
<ln> (Low Normal)
•
Temperature limit varies by device (see device Product Specification Document or
Product Technical Specification).
•
Default = -15
°
C.
<lc> (Low Critical)
•
Temperature limit varies by device (see device Product Specification Document or
Product Technical Specification).
•
Default = -25
°
C.
Table 3-2: Modem Status Command Details (Continued)
Command Description