Thermal Mitigation Commands
Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
233
!SARSTATEDFLT
Set/report default SAR backoff state
Set or report the default (persistent) SAR (Specific Absorption Rate) backoff state.
Note: This setting is persistent. To temporarily change the backoff state, use !SARSTATE.
Password required:
No
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!SARSTATEDFLT=<state>
Response:
OK
Purpose:
Set the default SAR backoff state.
•
Query:
AT!SARSTATEDFLT?
Response:
<state>
OK
Purpose:
Indicate the default SAR backoff state.
•
Query list:
AT!SARSTATEDFLT=?
Purpose:
Display valid execution format and parameter values.
Parameters:
<state> (SAR backoff state)
•
0=No backoff
•
1–8=Backoff state 1 to 8
Table 11-2: SAR Backoff and Thermal Control Command Details (Continued)
Command
Description
