AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
160
Proprietary and Confidential - Contents subject to change
4118047
!RXDEN
Enable/disable WCDMA/LTE receive diversity
Enable or disable WCDMA/LTE receive diversity, or establish receive diversity as the
primary path. The new state takes effect the next time the modem is reset.
Note: To change from <state=0> to <state=2> (or from <state=2> to <state=0>, you must
issue AT!RXDEN=1, reset the modem, and then make the final state change.
Password required:
Yes—Execution format only
Reset required to apply changes:
Yes
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!RXDEN=<state>
Response:
OK
Purpose:
Set the current receive diversity state.
•
Query:
AT!RXDEN?
Response:
!RXDEN:
<state>
OK
Purpose:
Return the current receive diversity <state>.
•
Query List:
AT!RXDEN=?
Purpose:
Return a list of available <state> values to use in this command.
Parameters:
<state> (Current/ requested receive diversity state)
•
0 = Rx diversity disabled
•
1 = Rx diversity enabled
•
2 = Rx diversity is primary path
Table 5-2: Diagnostic Command Details (Continued)
Command
Description
