Sierra Wireless AirPrime WP75 Series, At Command Reference

Page: 117 / 300

Modem Status, Customization, and Reset Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 117
+WCNT
(notification)
Call connected—Unsolicited notification
Unsolicited notification received when an incoming or outgoing call has been connected into a
traffic channel state.
To WCNT (and other notifications), use AT+WUSLMSK. See
+WUSLMSK on
page 127 for details.
Notification format:
+WCNT: <service_option>,<RAT>
Examples:
•
Call originated using ATD18005551212 on a GSM/WCDMA/LTE connection:
Notifications received:
+WORG: 18005551212
+WCNT: 0,0
Parameters:
<service_option> (Service option indicating type of call)
•
0—GSM/WCDMA/LTE call
•
All other options are for 1x/EVDO calls:
•
2—Loopback (Note: 9 and 55 also indicate loopback)
•
3—Speech (Note: 17, 68, 32768 also indicate speech)
•
6—SMS (Note: 14 also indicates SMS)
•
9—Loopback (Note: 2 and 55 also indicate loopback)
•
12—Circuit-switched data
•
14—SMS (Note: 6 also indicates SMS)
•
17—Speech (Note: 3, 68, 32768 also indicate speech)
•
18—OTAPA (Note: 19 also indicates OTAPA)
•
19—OTAPA (Note: 18 also indicates OTAPA)
•
33—1x data
•
35—Position determination (Note: 36 also indicate position determination)
•
36—Position determination (Note: 35 also indicate position determination)
•
55—Loopback (Note: 2 and 9 also indicate loopback)
•
68—Speech (Note: 3, 17, 32768 also indicate speech)
•
32768—Speech (Note: 3, 17, 68 also indicate speech)
•
33023—1xEVDO
<RAT> (Network type)
•
Valid range: 0–3
•
0—GSM/WCDMA
•
1—LTE
•
2—CDMA
•
3—TDS
Table 3-2: Modem Status Command Details (Continued)
Command Description