Modem Status, Customization, and Reset Commands
Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
103
!SELACQ
Select RAT acquisition order
Select the acquisition order for RATs (Radio Access Technologies).
Password required:
Yes
Usage:
Note: The number of <mode> parameters supported varies is device dependent. Use the
Query list command format to show the supported number and type of <mode> values.
•
Execution:
AT!SELACQ=<mode1>[,<mode2>[,<mode3>[,<mode4>[,<mode5>[,<mode
6>]]]]]
Response:
OK
Purpose:
Indicate the acquisition order for up to six RATs. See <mode> parameter
description for details.
•
Query:
AT!SELACQ?
Response:
<mode1>
<mode2>
<mode3>
<mode4>
<mode5>
<mode6>
OK
Purpose:
Show the current acquisition order for the supported RATs.
•
Query list:
AT!SELACQ=?
Purpose:
Display valid execution format and parameter values.
Parameters:
<mode
n
> (RAT types)
•
Available RAT types are device-dependent.
Valid values (device-dependent):
•
"CDMA"
•
"LTE"
•
LTE-M1
•
LTE-NB1
•
"WCDMA"
•
"HDR"
•
"GSM"
•
"TDS"
•
If the execution format is issued with fewer than the number of supported <mode>s,
the missing entries are appended based on the default order shown above.
•
Example: If the command is issued as
AT!SELACQ=HDR,CDMA,GSM
Then
AT!SELACQ?
will show:
HDR
CDMA
GSM
LTE
WCDMA
Note: Even if the device does not support a specific RAT (for example, CDMA), the RAT will
still appear in the Query List response.
Table 3-2: Modem Status Command Details (Continued)
Command
Description
