Modem Status, Customization, and Reset Commands
Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
101
!SCACT
Activate/deactivate data connection
Activate or deactivate a specific data connection between the host and network.
Password required:
No
Usage:
•
Execution:
AT!SCACT=<state>[,<pid>]
Response:
OK
Purpose:
Activate or deactivate the connection for the specified <pid>. If <pid> is not
included, use the default <pid> (see <pid> for values).
•
Query:
AT!SCACT?[<pid>]
Response:
!SCACT: <pid>,<state>
...
(additional <pid>/<state> combinations)
OK
Purpose:
Display a list of all defined connections and their current state, or display a
specified connection and its state.
•
Query list:
AT!SCACT=?
Purpose:
Display valid execution format and parameter values.
Parameters:
<pid> (PDN connection ID)
•
Valid values:
•
GSM/UMTS/LTE:
•
(WP75xx/WP85xx) 1–16
(WP76xx/WP77xx) 1–24
•
Default: 1 (all networks except Sprint and Verizon)
•
3 (Sprint, Verizon)
•
CDMA:
•
101–107
•
Default: 101 (all networks except Sprint and Verizon)
•
103 (Sprint, Verizon)
<state> (Current state of specified <pid>)
•
0= Deactivated
•
1=Activated
•
Any other value causes command execution to return ERROR.
Table 3-2: Modem Status Command Details (Continued)
Command
Description
