
Installation and Startup
Rev 3 Dec.16
45
Step 7 — Mounting the RV50 Series
Gateway
Warning:
This gateway is not intended for use close to the human body. Antennas
should be at least 8 inches (20 cm) away from the operator.
Mount the gateway where:
•
There is easy access to the cables
•
Cables are not bent, constricted, close to high amperages or exposed to
extreme temperatures
•
The front panel LEDs are easily visible
•
There is adequate airflow
•
It is away from direct exposure to the elements, such as sun, rain, dust, etc.
•
It will not be hit or come into contact with people, cargo, tools, equipment, etc.
Mounting Brackets
The RV50 Series gateway comes with mounting screws. An optional DIN rail
mounting bracket (P/N 6000659) is available from Sierra Wireless.
Flat Surface Mount
If you are mounting the RV50 Series gateway on a flat surface, use the mounting
screws that come with the gateway.
Summary of Contents for AirLink RV50 Series
