Sierra Wireless Airlink Raven XE HSPA, User Manual, Page: 42 / 53

AirLink Raven XE HSPA User Guide
42 20080408
Note: You can use the GX400 DC power cable (P/N 2000380) that includes a green wire
for Pin 4.
Caution: Never apply an external voltage while in the Output mode. This will cause
damage to the unit.
Monitoring the Input and Output
You can monitor the status of the digital inputs using ACEmanager or AT
Commands, or with special reports sent by email, SMS, or other Event Reporting
report types. In ACEmanager, select the I/O group.
Figure 5-5: ACEmanager : I/O
Note: Refer to the ALEOS User Guide for configuring Raven XE I/O in ACEmanager.