SNMP : Simple Network Management Protocol
Rev 3.0B Feb.08
61
Trap Destination
*SNMPTRAPDEST
needs
to
be
set
with
the
destination
IP
and
port.
If
either
are
set
to
zero
or
empty,
SNMP
traps
are
disabled.
Note: Traps are sent out according to the SNMP security level (i.e. if
the security level is 2, traps will be authenticated and encrypted).
Currently, the only trap supported is LinkUp.
Community String
The
community
string
can
be
configured
using
*SNMPCOM
‐
MUNITY.
The
default
is
“public”.
SNMP MIB Definition Sample
AIRLINK-MIB DEFINITIONS ::= BEGIN
IMPORTS
ObjectName FROM SNMPv2-SMI
MODULE-COMPLIANCE FROM SNMPv2-CONF;
org OBJECT IDENTIFIER ::= { iso 3 }
dod OBJECT IDENTIFIER ::= { org 6 }
internet OBJECT IDENTIFIER ::= { dod 1 }
private OBJECT IDENTIFIER ::= { internet 4 }
enterprises OBJECT IDENTIFIER ::= { private 1 }
airlink OBJECT IDENTIFIER ::= { enterprises 20542 }
general OBJECT IDENTIFIER ::= { airlink 1 }
common OBJECT IDENTIFIER ::= { airlink 2 }
status OBJECT IDENTIFIER ::= { airlink 3 }
gps OBJECT IDENTIFIER ::= { airlink 4 }
-- GENERAL --
phoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (10))
MAX-ACCESS read-only
STATUS current
::= { general 1 }
deviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
::= { general 2 }
