Specifications
Rev 3 Feb.17
34
4118699
Input / Output
GPIOs:
•
Configurable I/O pin on power connector
•
GPIOs (4)—Connector type: RS-232 DB9 serial connector (see
Uses:
•
Digital input with optional pullup (see
•
Open drain output with 500 mA sink capability
Power Adapter Pins
4-Pin connector:
•
Power
•
Ground
•
Configurable GPIO (digital I/O)
(Output to be supported by future software update.)
•
Configurable ignition sense
Reset
Manual reset button on front panel
LEDs
For more information, see
.
6 LEDs:
•
GNSS
•
Wi-Fi
•
Network
•
Signal
•
Activity
•
Power
Mechanical Specifications
•
Weight
·
5.3 lb/2.4 kg
•
Dimensions
·
Width: 10.6 in / 27.0 cm
·
Depth: 8.7 in / 22.0 cm
·
Height: 2.4 in / 6.0 cm
•
Housing—The MG90 is made of ruggedized powder-coated
aluminum.
•
RoHS—The MG90 complies with the Restriction of Hazardous
Substances Directive (RoHS). This directive restricts the use of
six hazardous materials in the manufacture of various types of
electronic and electrical equipment.
Screw Torque Settings
•
Mount screws (M6)— 40 kgf/cm (3.92 Nm/35 in-lb). Screws are
included with the optional mounting bracket.
•
Antennas—Use the SMA wrench provided to hand-tighten the
antennas to the SMA connectors. Do not over-tighten. Recom-
mended torque is 0.6–0.8 Nm (5–7 in-lb), and max torque
should not exceed 1.1 Nm (10 in-lb).
Operating Voltage
Input voltage: 7–36V
Power Consumption
Power state:
•
ON:
·
1 cellular radio—14 W (typ), 17 W (max)
·
2 cellular radios—18 W (typ), 21 W (max)
•
Standby—< 135 mW (max)
Table 3-1: General Router Specifications (Continued)
