Sierra Wireless AirCard W801, User Manual

Page: 90 / 164

84 Advanced Settings
Sounds Section of the Device Tab
From the Sounds section of the
Device
tab, you can enable or disable sounds for specific types of
events.
1.
Log in to the home page.
2.
Click the Advanced Settings button.
3.
Select
Device > Sounds
.
4.
Next to each of the event types, select
Enable
or
Disable
.
Sounds for the following events can be individually enabled or disabled:
●
Low battery — Useful as a reminder to charge the device. From the Alert when drop-down list, you
can set the battery level at which an alert sounds.
●
System alerts — When you hear the device beep, use the device LCD or the Alerts window to get
information about the alert. See “Alert Information” on page 40.
Note:
System alerts include several types of events, for example:

• Critical battery

• Critical temperature

• Software update available

• Network update available

• Router settings reset

• Device startup failure
●
Connect to Internet
●
Connection lost
●
Wi-Fi user has joined — Useful, for example, if you’re the only one using the device, to detect an
intruder.
●
Wi-Fi user has left
●
Last user has left
— You can turn the device off if nobody will be using it for a while.
About Section of the Device Tab
To view information about your device:
1.
Log in to the home page.
2.
Click the Advanced Settings button.
3.
Select Device > About .
Note: 4G information is not available if WAN mode is “3G only”.

( WAN mode is in Advanced Settings > WAN > Setup .)