Sierra Wireless AirCard W801, User Manual

Page: 68 / 164

62 Viewing Device Information
Section 3M
Viewing Device Information
To view information about your device:
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Select
Device > About
.
Note: 4G information is not available if WAN mode is “3G only”.

( WAN mode is in Advanced Settings > WAN > Setup .)
The following information is displayed:
●
Manufacturer
●
Model
●
Software Version — Firmware version of the router component of the device.
●
Router PRI version
— PRI version of the router component of the device. The PRI (Product Release
Instructions) is a file that contains the settings used to configure wireless products for a particular
service provider, customer, or purpose.
●
ESN/MEID (3G).
The ESN(Electronic Serial Number) is the unique first-generation serial number assigned to the 3G
component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number assigned to
the 3G component of the device.
●
PRL version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels/network carrier used by the 3G modem. An updated
PRL may improve your 3G network service.
●
Firmware version — Firmware version of the 3G component of the device.
●
PRI version
— PRI version of the 3G component of the device.
●
MAC address
— MAC address of the 4G module. Each wireless device has a unique MAC address
(assigned by its manufacturer).
●
Firmware version — Firmware version of the 4G component of the device.
●
Activation status — 3G activated, or not activated.
●
Activation date — Date that the 3G modem/account were first activated.
●
Network operator
— The operator (carrier) that your device and account were activated for.