Sierra Wireless 1400897-I, User Manual

Page: 20 / 58

4114877 Rev 5.0 October 12, 2015 20
Development Kit User Guide General Description
2.2.4. Test Ports
There are a total of 64 test ports available in the AirPrime HL Series Development Kit. The following
table lists the
test port serigraphy and the corresponding signal names of the applicable HL series
module .
For more information about these signals, refer to the product technical specifications listed in section
6 Reference Documents.
Table 4. AirPrime HL Series Development Kit Test Ports
Test
Port # Test Port
Serigraphy Board to Board
Connector Pin # HL6528x Signal
Name HL75xx Signal
Name HL85xxx Signal
Name
1 TXD1 CN200.81 UART1_TX UART1_TX UART1_TX
2 RXD1 CN200.85 UART1_RX UART1_RX UART1_RX
3 RTS1 CN200.73 UART1_RTS UART1_RTS UART1_RTS
4 CTS1 CN200.79 UART1_CTS UART1_CTS UART1_CTS
5 DTR1 CN200.77 UART1_DTR
UART1_DTR
1
/
TRACE_DATA3
2
UART1_DTR
6 RI1 CN200.71 UART1_RI UART1_RI
1
UART1_RI
7 GND
8 GND
9 DSR1 CN200.83 UART1_DSR
UART1_DSR
1
/
TRACE_DATA0
2
UART1_DSR
10 DCD1 CN200.75 UART1_DCD
UART1_DCD
1
/
TRACE_DATA1
2
UART1_DCD
11 GPIO1 CN201.32
GPIO1 /
I2C1_CLK GPIO1 /
I2C_CLK
3,4
GPIO1/I2C_CLK
12 GPIO2 CN201.30 GPIO2
GPIO2 /
TRACE_DATA2
2
GPIO2
13 GPIO3 CN201.51
UIM1_DET /
GPIO3 GPIO3 /
UIM_DET GPIO3 /
UIM_DET
14 GPIO4 CN201.69
UIM2_DET /
GPIO4
GPIO4 GPIO4
15 GPIO5 CN200.90
GPIO5 /
I2C1_DATA GPIO5 /
I2C_SDA
3,4
GPIO5/I2C_SDA
16 GPIO6 CN201.60 GPIO6 GPIO6 GPIO6
17 GPIO7 CN201.40 GPIO7 GPIO7 GPIO7
18 GPIO8 CN201.42 GPIO8
GPIO8 /
TRACE_CLK
2
GPIO8
19 GPIO9 CN200.8 UIM2_VCC NC1 NC1
20 GPIO10 CN201.66 SPI1_MISO
GPIO10
2
/
SPI1_MISO
3,4
GPIO10
21 GPIO11 CN201.38 SPI1_CLK
GPIO11
2
/
SPI1_CLK
3,4
GPIO11
22 GPIO12 CN200.10 UIM2_CLK / PMW
GPIO12
2
/
UIM2_CLK
4
PWM2/GPIO12
23 GND
24 PWM1 CN200.4
UIM2_RESET /
BUZZER
UIM2_RESET
4
PWM1
25 GPIO13 CN201.70 SPI1_SRDY
GPIO13
2
/
SPI1_SRDY
3,4
DEBUG_TX /
GPIO13