Jeep Wrangler TJ SUN TOP
Installation Guidelines
For:
1997-2006 Jeep Wrangler TJ Sun Tops
PN:
10-40-TJS
!!STOP!!
Before proceeding make sure the upper door is the correct item for the vehicle you are installing it on.
PARTS LIST
Fabric Sun Top
Qty 1
TOOLS REQUIRED
None
DO NOT INSTALL THIS ITEM ON ANY VEHICLE OTHER THAN ONE LISTED ABOVE
THESE UPPER DOORS ARE INTENDED TO BE FIT OVER THE FACTORY ORIGINAL HARDWARE AND FRAME. IF THE FRAME
IS DAMAGED OR MISSING PARTS DO NOT ATTEMPT THIS INSTALLATION BEFORE REPAIRS ARE MADE TO THE VEHICLE.
It is important to read the complete instruction guideline manual BEFORE beginning the installation of your new replacement upper doors.
This will familiarize you with all aspects of the installation and help to avoid mistakes. It will be helpful if you keep this guideline manual for
future reference.
SIERRA OFFROAD
FACTORY REPLACEMENT JEEP SOFT TOPS
The material may have contracted, depending on at what temperature it has been stored. It is highly recommended that you remove the
upper doors from the box; lay it out flat at a temperature above 72F and let it relax for at least 24 hours. As well the installation should be
done only in an environment where the air temp is above 72F.
To avoid improper installation of this item it is imperative that you read and follow these guidelines completely. Failure to install the upper
door skins correctly may result in a dangerous situation for the vehicle occupants as well as other motorists.
SIERRA OFFROAD TAKES NO RESPONSIBILITY FOR THE ACCURACY OR COMPLETENESS OF THESE
INSTALLATION GUIDELINES. THEY ARE PROVIDED ONLY FOR INFORMATION PURPOSES. IT IS
THE SOLE RESPONSIBILITY OF THE INSTALLER TO ENSURE THAT THE INSTALLTION HAS BEEN
PERFORMED CORRECTLY, THERE ARE NO LOOSE OR MISSING PARTS AND THE VEHICLE HAS BEEN
ROAD TESTED AFTER INSTALLATION OF THE REPLACEMENT TOP AND DEEMED SAFE TO OPERATE.
