Siera Wireless MP555, Software Installation Manual

Page: 18 / 74

MP 555 GPS Software Installation and Configuration Guide
16
l
4. Use the and
Back
·
“MP Series
or
l to USB,
·
5. ) or
)
Yes
or
6.
OK
.
7. Click
Finish
then select
8.
.
Click
Finish
9.
2130304
Note: If you want to have both a
USB and seria connection to the
modem, install the modem using
the USB option. See page 12.
Next
buttons to navigate through the
wizard.
If you are running Windows 2000 or XP, you are
prompted to configure Watcher for either the
Modem (Serial)” “MP Series Network Adapter (USB)”
driver. (If you are running Windows 98 or NT, you only
have the serial option.) If you are connecting the modem
to a DB9 serial connector on the PC, select the first
option. If you are connecting the modem to the USB
connector on the PC, select the second option.
Note: Once the modem is
installed, if you chose to switch
connections (from seria
or from USB to serial), you must
rerun the installer.
If you have multiple COM ports, the wizard prompts
you to select one. Use the check boxes to select the port
to which you are connecting the modem. (If you are
connecting the modem to a USB connector on the PC,
your selection here has no effect.)
If the Digital Signature Not Found (Windows 2000
Software Installation (Windows XP window appears, you
can safely ignore the warning. Click
Continue Anyway
when it appears.
If you are installing the USB driver, you are prompted to
connect the modem. Connect the modem and click
Note: The final window of the
wizard may be slow to appear as
the driver installation occurs.
in the final window. To close the CD start-up
menu, select the taskbar button to redisplay the window,
exit
in the lower right corner of the window.
If you are running Windows XP, the Found New
Hardware Wizard appears. Click
Next
. If the Hardware
Installation window appears again, click
Continue Anyway
on the final window of the wizard.
If you are running Windows NT, a window appears
informing you that you must install the
“Sierra Wireless MP Series Modem” prior to using
Watcher. Click OK. (The modem driver installation is
covered in the next section.)
10. If you are installing the serial driver, connect the modem
to your PC. Windows then completes driver installation. If
you are running Windows 98, 2000, or XP, you can
proceed to the next chapter (page 19) for instructions on
configuring your account. If you are running Windows
NT, proceed to the next section.