Sienna ES60GFDBL Use And Care Manual Download Page 6

6

USE

WARNINGS AND ADVICE FOR THE USER:
- Do not attempt to change the technical characteristics of the product because it can be dangerous.
- If you decide longer use this appliance any more (or replace an old model), before disposing of it,

make it inoperative in conformity with current law on the protection of health and the prevention of
environmental  pollution  by  making  its  dangerous  parts  harmless,  especially  for  children  who
might play on an abandoned appliance.

- Do not touch the appliance with wet or damp hands or feet.
- Do not use the appliance barefoot.
-  The  manufacturer  will  not  be  liable  for  any  damage  resulting  from  improper,  incorrect  or

unreasonable use.

- During, and immediately after operation, some parts of the hotplate are very hot: avoid touching

them.

- After using the cook top, make sure that the knob is in the closed position and close the main tap

of the gas supply or gas cylinder.

- If the gas taps are not operating correctly, call the  Customer Care Department.
Abnormal operations:
Any of the following are considered to be anormal operation and may require servicing:
- Yellow tipping of the hob burner flame.
- Sooting up of cooking utensils.
- Burners not igniting properly.
- Burners failing to remain alight.
- Burner extinguished by cupboard doors.
- Gas valves which are difficult to turn.

CAUTION: 

In case of hotplate glass breakage:
● shut immediately off all burners and any electrical heating element and isolate the appliance from
the  power supply,
● do not touch the appliance surface,
●do not use the appliance. 

Do  not  place  anything,  eg.  flame  tamer,  asbestos
mat,  between  pan  and  pan  support  as  serious
damage to the appliance my result.

Do  not  remove  the  pan  support  and  enclose  the
burner  with  a  wok  stand  as  this  will  concentrate  and
deflect heat onto the hotplate.

Do  not  use  large  pots  or  heavy  weights  which  can
bend  the  pan  support  or  deflect  flame  onto  the
hotplate.

Symbol 1

Symbol 2

Symbol 3

Locate  pan  centrally  over  the  burner  so  that  it  is
stable and does not overhang the appliance.

Use only a wok support supplied or recommended by
the manufacturer of the appliance.

Symbol 4

Symbol 5

Summary of Contents for ES60GFDBL

















Reviews: