
en
Selecting options
26
1.
Touch button
Ù
(Drying)
and activate
the function
‘ž£‚
or
‘ž£ƒ
.
2.
Do not exceed the maximum loads
for drying. Overview of programmes
3.
Select maximum permitted spin
speed of the washing programme to
obtain a good drying result.
0
(Finish in)
@
:Delays the Finished in time (end
of programme).
Note:
The respective programme
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration requires changing,
e.g. due to changes in the settings of
the options.
Before the programme starts, the end of
the programme can be preselected in h
steps up to maximum 24h.
When the programme has started,
the preselected time is displayed e.g.
‰
:
‹‹
h and counts down until
the programme starts. Then
the programme duration is displayed,
e.g.
ƒ
:
„‹
h
When the programme has started,
the preselected time can be changed
as follows:
1.
Select Start/
Reload
.
2.
Select
5
(Finished in)
button
and change Finished in time.
3.
Select
Start
/Reload.
\
Selecting options
Selecting options
Select the desired additional functions
with
Ö
buttion, keep on press the
buttton until your desired function frame
flases and then activate the shosen
function with
è
button,than the function
is selected.or press
è
button again to
deactive this function.
(
(speedPerfect)
For a shorter wash time with a
comparable washing result to the
standard programme.
Note:
Do not exceed maximum load.
Overview of programmes
EcoPerfect
¦
0
: Energy-optimised washing by
reducing the temperature while
achieving a consistent washing result.
Note:
The washing temperature is
lower than the selected temperature.
For special hygiene requirements, it is
recommended that a higher
temperature be selected or the
Speed
Perfect option be used for a 5 kg
load.
Rinse plus
8
: Additional rinse cycle. For areas
with very soft water or for an even better
rinsing result.
Easy iron
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry increased
slightly.