Installation and connection
en
37
7.
Add standard detergent to
dispenser
II
according
to manufacturer’s instructions for
light soiling.
Note:
To prevent frothing, use only
half the recommended amount
of detergent. Do not use any
standard or mild detergents.
8.
Close the detergent drawer.
9.
Select
䄒㯝倍橵
I
(
Start/Pause
).
10.
When the programme ends, switch
off the appliance.
Your washing machine is now ready
for use.
Transportation
1.
Remove covers and keep in a safe
place.
If required, use a screwdriver.
2.
Insert all 4 sleeves.
Clamp mains cable on the holders.
Insert and tighten the bolts.
Before switching on the appliance:
Notes
■
Always
remove the transportation
protection devices!
■
To prevent unused detergent from
flowing into the outlet during the next
wash: Pour 1 litre of water into
dispenser
II
and start the
অ㝡≤
(
Spin)
programme.