en
Operating the appliance
14
■
Do not leave door open for
a prolonged period – water could
run out of the laundry.
Changing the programme
if you have mistakenly started a wrong
programme.
1.
Select
䄒㯝倍橵
I
(
Start/Pause
).
2.
Select another programme.
If required, adjust the presetting
and/or select other functions.
3.
Select
䄒㯝倍橵
I
(
Start/Pause
).
The new programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
1.
Select
䄒㯝倍橵
I
(
Start/Pause
).
2.
Cool down washing: select
Rinse
3.
Select
䄒㯝倍橵
I
(
Start/Pause
).
For programmes at low temperature:
1.
Select
䄒㯝倍橵
I
(
Start/Pause
).
2.
Select
Spin
.
3.
Select
䄒㯝倍橵
I
(
Start/Pause
).
End of the programme
Start/Reload indicate light goes out and
End
or
- - - -
(if
- - - -
was selected,
without drain) appears on the display
field, buzzer sounds. Set volume of
buzzer
If - - - - was selected, - - - - is displayed
after the programme ends, touch
䄒㯝
倍橵
I
(
Start/Pause
) button.
Notes
■
The programme continues by
pumping out the water and spinning
the washing (the standard spin
speed can be changed beforehand).
■
If only the water is to be pumped out,
press the
䄒㯝倍橵
I
(
Start/
Pause
) button again before the
spinning starts. The programme is
interrupted and the door lock is
released. The washing can be
removed.
After washing
1.
Set programme selector to
$
ڌ→
(
Off)
.
2.
Open appliance door and remove
washing.
Notes
– Do not leave any items
of washing in the drum.
In the next wash they may shrink
or discolour something else.
– Remove any foreign objects from
the drum and the rubber seal.
Notes
– Leave detergent drawer and door
open so that residual water can
evaporate.
– Always remove the washing.
3.
Turn off the tap.
