manualshive.com logo in svg

Siemens WT47X940EU, Installation And Operating Instructions Manual, Page: 28 / 76

Share
Download
Siemens WT47X940EU Installation And Operating Instructions Manual Download Page 28

en

    Programme settings

28

0

Programme settings

Programme settings

Once you have set a programme, you 

are shown the available programme 

settings.
You can activate/deactivate or adjust 

the programme settings.

Notes

■

Not all programme settings are 

available for every programme.

■

Your changes are not saved 

permanently for the programme.

■

Press 

§

  to return to the higher-level 

screen.

■

Press 

ú

  in order to close the 

current view.

Activate/deactivate the programme 

setting as follows:

Press the setting.
The setting is activated if it is selected. 

The setting is deactivated if it is not 

selected.

Note:  

Your changes are implemented 

without further confirmation.

Adjust the programme setting as 

follows:

1.

Press the setting.

The setting options are displayed.

2.

Press and hold the sliding bar and 

swipe left/right.

The set value is displayed.

Note:  

Your changes are implemented 

without further confirmation.

Summary of Contents for WT47X940EU













































































Reviews:

No comments