Programme settings
en
25
0
Programme settings
Programme settings
Buttons
Displays
Explanations and information
Note:
Not all buttons and their functions can be selected in all programmes.
Remote Start
}
Pressing
Remote Start
}
enables the appliance to be started
remotely via the Home Connect app and takes you to the
Home Connect settings.
Pressing this button briefly enables the appliance to be started
remotely via the Home Connect app. Remote start remains ena-
bled for 24 hours after it has been activated. It is automatically
deactivated if you do not start the programme via the
Home Connect app during this time. If you carry out any opera-
tions on the appliance itself, such as opening the door or select-
ing a different programme, the remote start button will be
deactivated for safety reasons.
Notes
■
Remote start can only be activated if the appliance door is
closed.
■
Remote start cannot be activated if the childproof lock is on.
Press and hold this button for at least 3 seconds to go to the
.
ü
Level
^
:
Select the dryness level depending on the required degree of
dryness.
If you have selected a dryness level, this will be stored for the
selected programme even after the appliance has been
switched off. Exception: The settings will not be saved for Cot-
tons.
Cupboard Dry Plus
Ò
Multi-layered, thick laundry that does not dry readily.
Cupboard Pry
»
Normal, single-layered laundry.
Iron Dry
Ø
Normal, single-layered laundry that still needs to be damp after
drying and is suitable for ironing or hanging up.
Adjust
^
Ô
Ô
Ô
Ô
Ô
Ô
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
achieve a particular dryness level. To increase the dryness level,
set the degree of dryness to between
Ô
and
Ô
Ô
Ô
. This will
extend the programme duration but the temperature will remain
the same.
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.
