background image

en

    Installation and connection

18

Optional accessories

Order optional accessories

*

 from the 

after-sales service:

Platform:

For easier loading and unloading, 

raise your dryer with a platform.

Transport laundry using the clothes 

basket integrated into the platform 

drawer.

Order number: 

WZ20505

.

Basket for woollens:

Dry individual woollen items, sports 

shoes and soft toys in the basket for 

woollens.

Order number: 

WZ20600

.

Transport and frost protection

1.

Empty the condensate container.

2.

Select any programme using 

the programme selector.

3.

Press the Start button.

4.

Wait for 5 minutes.

Note:  

The condensation is drained.

5.

Empty the condensate container 

again.

6.

Switch off the dryer.

Note:  

Despite draining, there will 

always be some residual water in 

the dryer.

Caution!

Any residual water may leak out 

and cause material damage.

Transport the dryer in an upright 

position.

Caution!

The dryer contains coolant and may be 

damaged.

Allow the dryer to rest for two hours 

before initial use.

* depending on the model

Summary of Contents for WT47U640

















































Reviews: