en
Additional programme settings
16
\
Additional programme
settings
Additional programme settings
SpeedPerfect
For a shorter wash time with a
comparable washing effect to the
standard programme.
Note:
Do not exceed maximum load.
Overview of programmes
EcoPerfect
For saving energy with a washing result
comparable to that of the standard
programme.
Rinse plus
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for an even
better rinsing result.
1
Operating the
appliance
Operating the appliance
Note:
Install
and
connect
washing
machine properly.
Before the 1st wash, wash once
without
any washing.
Preparing the washing
machine
Notes
■
Never switch on a damaged
washing machine!
■
1.
Insert mains plug.
2.
Turn the tap on.
3.
Open the washing machine door.
4.
Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must deactivate it
before you can set a programme.
Use the programme selector to select
the required programme. Can be
rotated in either direction.
The washing machine is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
■
the programme duration,
■
the preset temperature,
■
the preset spin speed and
■
the maximum load.
Change the programme
default settings
You can use the displayed programme
presettings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed. They are not
saved when the appliance is switched
off.
Programme default settings
