Siemens WM6HXEL0DN, User Manual And Installation Instructions

Page: 58 / 72

en
Troubleshooting
58
Errors Cause Troubleshooting
"E:60 / -2B" The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
"E:10 / -10" The filter in the water inflow is
blocked.
▶
Clean the water inflow filter
→ Page 55 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked
or jammed.
▶
Ensure that the water inlet hose is not
kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 67
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 67
All other error codes. Malfunction
▶
Call the after-sales service.
→
"Customer Service", Page 67
Cooling down the detergent
solution. To protect the wastewater
pipes, the hot detergent solu-
tion is cooled before being
drained.
▶
Wait until the detergent solution has
cooled down.
Malfunctions
Errors Cause Troubleshooting
The appliance is not working. The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse
box.
There has been a power cut.
▶
Check whether the lighting in your kit-
chen or other appliances are working.
The programme does not
start. You have not pressed ⁠ .
▶
Press ⁠ .
Door is not closed.
1.
Close the door.
2.
Press ⁠ to start the programme.
Childproof lock is activated.
▶
→
"Deactivating the childproof lock",
Page 43