Siemens WM6HXE0LDN, User Manual And Assembly Instructions

Page: 45 / 76

Basic operation
en
45
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
Adding laundry
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Press .
The appliance is paused and
checks whether it is possible to
add or remove laundry.
2.
Add or remove laundry.
3.
Close the door.
4.
Press .
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Press .
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high: Start
the
Spin
or
Drain
programme.
3.
Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press .
Unloading the laundry
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Open the door.
2.
Remove the laundry.
Switching off the appliance
1.
Press .
2.
Wipe the rubber gasket dry and re-
move any foreign objects.