Operating the appliance
en
33
Programme end during rinse
hold
The following appears on the display
panel:
Continue the programme by:
■
Select the
Spin
(change the spin
speed if necessary) or the
Drain
programme.
■
Press the
Ü
button.
Programme end
Ï
Finished, remove washing
appears
on the display panel. The
Ü
button
indicator lamp is off.
Removing laundry/switching
off the appliance
1.
Open the loading door and remove
the laundry. Follow the information
on the display panel.
2.
Press the
#
button. The appliance is
switched off.
3.
Turn off the tap.
Note:
Not required for AquaStop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
■
Wipe the rubber gasket dry.
Notes
■
Leave the loading door and
detergent drawer open so that any
residual water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■
If the display panel goes off at the
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
6HOHFWVSLQRUGUDLQ
5LQVHKROGUHDFKHG
DQGWKHQVWDUW
6SLQ
'UDLQ
