en
Intelligent dosing system
32
Filling the dispensers:
The dispenser covers in the detergent
drawer are marked with the following
symbols:
■
ß
Standard/universal detergent
■
i
/
ß
Fabric softener
1.
Open the detergent drawer.
2.
Open the dispenser cover(s).
3.
Add detergent/fabric softener.
Do not fill above the
max.
marking.
4.
Close the cover(s).
5.
Slowly push the detergent drawer in
completely.
When the appliance is switched on, the
fact that the detergent drawer is closed
completely is indicated by the following:
■
the corresponding illuminated
display on the drawer handle lights
up when intelligent dosing i-Dos
ô
,
i-Dos
i
I
ô
is selected.
■
the display flashes once and then
goes out if intelligent dosing is not
selected.
Everyday use
Illuminated displays on the drawer
handle:
■
The display
lights up
if intelligent
dosing is selected for the
corresponding dispenser:
–
ô
for dispenser
ß
(detergent),
– for the
i
I
ô
illuminated display
for the combined compartment
i
/
ß
, the lamp for the
appropriate dispenser content
lights up:
i
for fabric softener/
ô
for
detergent.
■
The display
flashes
if the fill level of
the selected intelligent dosing
dispenser is below the minimum
level.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for programmes in which intelligent
dosing can be used.
Overview of programmes
The dosage strength has been preset to
low (lightly soiled laundry) for
detergent
ô
and to medium (medium
level of softness) for fabric softener
i
.
It can be changed for each programme.
In addition to intelligent dosing, cleaning
aids (e.g. stain remover) can be added
manually to compartment
À
Á
, if
Note:
Depending on the programme,
the selection (on/off) as well as the
relevant dosage strength that has been
selected for i-Dos
i
I
ô
and i-Dos
ô
are saved until they are changed, even
when the machine is switched off.
