background image

Positioning and connecting       

en

51

Water outlet

:

Warning

Risk of scalding!

When you are washing at high 

temperatures, there is a risk of scalding 

if you come into contact with hot water 

(e.g. when draining hot water into a 

washbasin). 

Do not reach into the hot water.

Caution!

Water damage

If the drain hose slips out of the 

washbasin or the connection point 

during draining due to high water 

pressure, any escaping water may 

cause water damage.

Secure the drain hose so that it cannot 

slip out.

Caution!

Damage to the appliance/fabrics

If the end of the drain hose is immersed 

in the drained water, water may be 

sucked back into the appliance and 

may damage the appliance/fabrics.

Make sure that: 

The plug does not block drainage 

from the washbasin.

The end of the drain hose is not 

immersed in the drained water.

The water drains away quickly 

enough.

Note:  

Do not kink the water drain hose 

or put strain on it lengthways.

Connection

Drainage into a washbasin

Drainage into a siphon

The connection point must be 

secured using a hose clamp with a 

diameter of 24 - 40 mm (available 

from specialist dealers).

Drainage into a plastic pipe with 

rubber bushing or into a drainage 

pit

Summary of Contents for WM16Y80XES

























































Reviews: