Siemens WM16Y790DN Instruction Manual And Installation Instructions Download Page 12

Page: 12 / 64

The main points in brief

Insert mains plug.
Turn the tap on.

Open the washing
machine door.

To switch on, press
the

button.

Select the pro-
gramme, e.g.

Cottons

Dosage: 30%

Please load laundry: max. 8kg

Sort the washing.

Insert the washing.

Do not exceed maximum load.

Dosage: 70%

Please load laundry: max. 8kg

Open the detergent
drawer.

Dose detergent according to dosing recommen-
dation.

Close the washing
machine door.

FODFN

If required, change programme settings of the selected programme and se-
lect programme settings/options.

Select

(

Start

Pause).

Finished, remove washing

End of the programme

For switching the
machine on, press
the

button.

Turn off the mains
supply (for models
without Aqua-Stop).

Summary of Contents for WM16Y790DN

































































Search results

Summary of Contents for WM16Y790DN

Reviews:

Related manuals for WM16Y790DN

Brands by name

Popular brands

Siemens WM16Y790DN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM16Y790DN

Reviews:

Related manuals for WM16Y790DN

Brands by name

Popular brands