Siemens WM16XGH1GB, User Manual And Installation Instructions

Page: 43 / 72

Basic operation
en
43
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
Adding detergent and care
product
Notes
¡
Please read the safety information
→
Page 4 to ensure that you use
the appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
Page 38
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 20
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start / Reload
.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
Adding laundry
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
1.
Press
Start / Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload
.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
1.
Press
Start / Reload
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high: Start
the
Spin
or
Drain
programme.
3.
Remove the laundry.
www.devicemanuals.eu/