Siemens WM16W790ES Instruction Manual And Installation Instructions Download Page 13

Page: 13 / 56

Environmental protection

Environmental

protection

Environmental protection

Packaging/used appliance

Tips on economical use

■

Always fill the appliance with the

maximum amount of laundry for the

relevant programme.

Overview of programmes

Page 30

■

Wash normally soiled laundry

without a prewash.

■

Save energy and detergent when

washing lightly and normally soiled

laundry.

Page 29

■

The selectable temperatures apply

to the care labels on the textiles. The

temperatures in the machine may

deviate from this so that you get the

optimum mix of energy-saving and

washing results.

■

Information on energy and water

consumption

Page 26

The displays provide information

about the relative level of energy and

water consumption in the selected

programmes.

The more indicator lights light up,

the higher the programme's

consumption.

This enables you to compare the

consumption levels of the different

programmes when choosing your

programme settings and decide on

an energy- and water-saving

programme setting.

■

Energy-saving mode

: The display

panel lighting goes out after a few

minutes and the

button flashes.

Press any button to activate the

lighting.

Energy-saving mode is not activated

if a programme is running.

■

Automatic switch off:

If the

appliance is not operated for a

prolonged period, it may

automatically switch off before the

programme starts and when the

programme has ended to save

energy. Press the main switch again

to switch on the appliance.

Switching the

Page 42

function

on/off

■

If the laundry is subsequently dried

in a tumble dryer, select the spin

speed according to the tumble dryer

manufacturer's instructions.

)

Dispose of packaging in an

environmentally-responsible

manner.

This appliance is labelled in

accordance with European

Directive 2012/19/EU

concerning used electrical and

electronic appliances (waste

electrical and electronic

equipment - WEEE).

The guideline determines the

framework for the return and

recycling of used appliances

as applicable throughout the

EU.

Summary of Contents for WM16W790ES

























































Search results

Summary of Contents for WM16W790ES

Reviews:

Related manuals for WM16W790ES

Brands by name

Popular brands

Siemens WM16W790ES, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM16W790ES

Reviews:

Related manuals for WM16W790ES

Brands by name

Popular brands