![Siemens WM14Y748DN Instruction Manual And Installation Instructions Download Page 39](http://html.mh-extra.com/html/siemens/wm14y748dn/wm14y748dn_instruction-manual-and-installation-instructions_385389039.webp)
Additional programme settings/options
en
39
Less Ironing *
(
æ
)
Settings that can be selected:
on
–
off
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note:
The washing's residual moisture
is increased.
Soak *
(
õ
)
Settings that can be selected:
on
–
off
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
To be used for particularly stubborn
soiling; put detergent in dispenser
I
before starting the appliance.
Notes
■
Load laundry of the same colour.
■
If your machine does not have this
option, you can soak as follows:
1.
Select the
Cottons30 °C
programme and the
Ü
button.
2.
Press the
Ü
button after approx. 10
minutes. The laundry remains in the
soaking solution.
3.
Leave the laundry to soak for as long
as required, then either press the
Ü
button again to continue the
programme or change the
programme.
Note:
No additional detergent is
required; the soaking solution is
used for washing.
Rinse Hold *
(
$
)
Settings that can be selected:
on
–
off
The washing remains in the water after
the last rinse cycle. End the programme
Silent Wash *
(
ç
)
Settings that can be selected:
on
–
off
Reduced noise values thanks to special
wash and spin cycle and deactivated
end signal. Especially suitable for
washing at night.
Note:
Residual moisture of the washing
is slightly increased.