background image

45

Installation

²

Humidity in the drum is caused by the final inspection.

Secure installation

m

Warning!  

Risk of injury!

– The washing machine is heavy – caution: take care 

when lifting it.

– If the washing machine is raised by protruding 

components (e.g. washing machine door), the 

components may break off and cause injuries.

Donot lift the washing machine by its projecting 

parts.

m

Caution!

Risk of stumbling!

If the hoses and power cord are installed improperly, 

there is a risk of tripping and injury.

Lay hoses and cables in such a way that there is no 

risk of stumbling.

m

Caution!

Washing machine may be damaged!

– Frozen hoses may tear/burst.

Do not install the washing machine in an area where 

there is a risk of frost or outdoors.

– If the washing machine is raised by protruding 

components (e.g. washing machine door), the 

components may break off and the washing 

machine may be damaged.

Donot lift the washing machine by its projecting 

parts.

²

– In addition to the safety information listed here, the local 

water and electricity supplier may have special requirements.

– If in doubt, have the appliance connected by a technician.

Summary of Contents for WM14Y740ES





























































Reviews: