20
Ø
End of programme by flot
$
(Rinse Hold). Programme
stops in the last rinse cycle.
– Select
inicio
/pausa+carga (Start/Pause)
Ü
.
The programme continues with the drain and spin cycles
(if required change spin speed).
– If only the drain cycle, but not the spin cycle, is required,
select and start the
p
(Drain) programme.
End of the programme
FINISHED
is indicated on the display panel.
If the symbol
Å
is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
