Siemens WM14XEH5GB, User Manual And Installation Instructions

Page: 49 / 84

Basic operation
en
49
2.
Select the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
3.
Press
Options
to call up the main
menu.
13.4 Saving the programme
settings
1.
Set the
Memory
programme.
2.
Press ⁠ to call up the sub-
menu for the memory pro-
grammes.
3.
Select a programme.
4.
Press
Main menu
to call up the
main menu.
5.
Adjust the programme settings if
required.
a
The programme is saved.
13.5 Loading laundry
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→
"Programmes", Page 30 .
Requirement:
The laundry is pre-
pared and sorted.
→
"Laundry", Page 44
1.
Open the door.
Make sure that the drum is empty.
2.
Load the laundry unfolded into the
drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
The dosing recommendation is
aimed at the maximum load for the
programme.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Requirement:
Find out the optimum
dosage for detergent and care
product.