Siemens WM14W790IL Instruction Manual And Installation Instructions Download

Page: 33 / 56

Overview of programmes

sensoFresh

is an innovative

programme that is designed to refresh

laundry and remove odours (e.g. the

smell of cigarettes and kitchen odours).

Sweaty fabrics must be washed.
In this programme, your laundry is

treated with active oxygen and water

mist; detergent is not added.
Active oxygen is a special type of

oxygen which effectively reduces

odours.
The programme is suitable for all types

of material and fabric, even for those

which should only be professionally

cleaned.
Once the programme has started, the

drum inside the appliance lights up and

the mist that is created can be seen.

Once the programme has finished, take

the laundry out of the drum and shake it

out briefly.

Notes

■

Leave the door and detergent

drawer open slightly when the

appliance is not in use.

Page 43

■

The active oxygen treatment is less

effective if the drum is dirty. Run the

Drum Clean

programme

regularly.

■

It is not possible to add laundry once

the programme has started.

■

If you cancel the programme or

switch to a different one, the door

will remain locked until there is no

longer any active oxygen in the

drum. This make take up to

25 minutes. The two symbols

and

will flash during this time. The

door will then unlock automatically.

***

Outdoor

Membrane-coated weatherproof or outdoor clothing and water-

resistant fabrics

Notes

■

Use special detergent suitable for machine-washing; add the

correct dosage to compartment

in accordance with the

manufacturer's instructions.

■

Laundry must not be treated with fabric softener.

■

Before washing, clean the detergent drawer thoroughly (all

compartments) to remove fabric softener residue.

Max. 2 kg

- 40 °C

, 0 - 800 rpm

ecoPerfect

, speedPerfect

Extra Rinse

Shirts / Business

Non-iron shirts or blouses made of cotton, linen, synthetic fibres

or blended fabrics

Notes

■

Shirts/blouses are only given a short spin on the

Less

Ironing

setting. Hang them up to dry while still dripping

wet.

Self-smoothing effect

■

Use the

Delicate / Silk

programme to wash shirts/

blouses made of silk or delicate fabrics.

Max. 2 kg

- 60 °C

, 0 - 800 rpm

ecoPerfect

, speedPerfect

Prewash

Extra Rinse

Less Ironing

Programme/Type of laundry/Instructions

Settings

* Reduced load for the

speedPerfect

setting

** Max. spin speed, depending on the model

*** Programme depending on the model

Summary of Contents for WM14W790IL

























































Search results

Summary of Contents for WM14W790IL

Reviews:

Related manuals for WM14W790IL

Brands by name

Popular brands

Siemens WM14W790IL, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14W790IL

Reviews:

Related manuals for WM14W790IL

Brands by name

Popular brands