Siemens WM14VPH9GB User Manual And Installation Instructions Download

Page: 36 / 64

Basic operation

Push in the detergent drawer.

Starting the programme

Note:

If you want to change the time

until the programme ends, set the
"Ready in" time first.

▶

Press

Start / Reload

The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.

The display shows either the pro-
gramme duration or the "Ready in"
time.

If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.

After the programme has ended,
the display shows:

End

Soaking laundry

You can soak the laundry before
washing in the appliance by pausing
the programme.

Note:

No additional detergent is re-

quired. The washing solution is then
used for washing.

Start the programme.

To pause the programme, after ap-
prox. 10 minutes, press

Start / Re-

load

To resume the programme, after
the desired soaking time, press

Start / Reload

Adding laundry

Notes

Please read the safety information
→

Page 4

to ensure that you use

the appliance safely.

If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.

Press

Start / Reload

The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→

"Display", Page 20

Add or remove laundry.

Close the door.

Press

Start / Reload

Cancelling the programme

Once the programme has started,
you can cancel it at any time.

Notes

Please read the safety information
→

Page 4

to ensure that you use

the appliance safely.

If you cancel a programme with
active oxygen, the door will remain
locked for up to 25 minutes until
there is no longer any active oxy-
gen in the drum. and

flash

while the active oxygen is being re-
moved. The door is then unlocked.

Press

Start / Reload

Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start

the

Rinse

programme.

– If the water level is high: Start

the

Spin

Drain

programme.

Remove the laundry.

Resuming the programme when
the programme status is Rinse
Hold

Set the

Spin

Drain

programme.

Press

Start / Reload

Summary of Contents for WM14VPH9GB

































































Search results

Summary of Contents for WM14VPH9GB

Reviews:

Related manuals for WM14VPH9GB

Brands by name

Popular brands

Siemens WM14VPH9GB, User Manual And Installation Instructions

Search results

Summary of Contents for WM14VPH9GB

Reviews:

Related manuals for WM14VPH9GB

Brands by name

Popular brands