Safety NL
1.4 Secure installation
Observe the safety regulations when installing the device.
WARNING ‒ Risk of electric shock!
Improper installations are dangerous.
▶
Only connect and operate the device in accordance with the
information on the type plate.
▶
Only connect the device to a mains supply with alternating
current via a properly installed earthing socket.
▶
The protective earth system of the electrical house installation must be
installed in accordance with the electrical engineering regulations. The
installation must have a sufficiently large conductor diameter.
▶
When using an earth leakage circuit breaker, only use a type
marked with .
▶
Never power the device via an external switching device, e.g. a
time switch or remote control.
▶
When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is not
possible, an all-pole disconnecting device must be installed in the
permanently installed electrical system in accordance with the
installation instructions.
▶
When setting up the device, make sure that the power cord is
not pinched or damaged.
Damaged power cord insulation is dangerous.
▶
Never bring the connecting cable into contact with hot
appliance parts or heat sources.
▶
Never bring the power cable into contact with sharp points or
edges.
▶
Never kink, pinch or alter the power cord.
WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶
Do not use extension cords or multiple sockets.
5
