NL Home Connect
Observe the information in your
router's documentation.
a flashes in the display.
a The device is trying to connect
to do with the WiFi home
network.
aWhen the display shows
displayed and permanent
lights up, the device is
connected to the home network.
work and transfer the network
information of the WLAN home
network (WiFi) to your device.
Required: The Home Connect app is
open and you have logged in.
1.
At least 3 s on Operate
to press.
via app
a The display shows auto reflected
to give.
2.
Set program to level 2.
a The display shows JUICE reflected
to give.
3.
Press Start/Refill
.
a flashes in the display
.
a The device will now create its own
WiFi network with the network name
(SSID) HomeConnect.
4.
When on the display err is
displayed, the device is not
connected to the home network.
-
Check if your device is within
range of the home network.
-
Reconnect the device to WLAN
home network (WiFi) with WPS
function.
4.
Call up WiFi settings in the mobile
end device.
5.
Connect the mobile end device to
the HomeConnect WiFi network
and enter the WiFi password (Key)
HomeConnect.
a Your mobile end device connects
themselves with the device. The
connection procedure can take up
to 60 seconds.
15.2 Connecting a device to a
WLAN home network
(WiFi) without WPS
function
If your router does not have a WPS
function, you can manually connect
the device to your WLAN (WiFi) home
network. The device briefly sets up its
own WiFi network. You can connect to
the WiFi network with a mobile
terminal device.
44
