Siemens WM14VMH5NL, User Manual And Installation Instructions

Page: 41 / 76

The Ministry in essence NL
3.
Fold the dosing aid down and click
into place.
a The drum rotates and a
load detection, which can take up to
2 minutes, after which the water
flows into the appliance.
a The display shows whether the program
duration or the ready-in time is
displayed.
a After the program end, it shows
display: -0-.
13.9 Soaking laundry
Remark: No additional detergent is
required. The soapy water is then
used for washing.
4.
Slide in the detergent drawer.
13.7 Dosing detergent and
care agent
1.
Start the program.
2.
To pause the program, after
approx. 10 minutes, press Start/
.
Comments
Refill
¡ Take the information about the un-
subject security →
Page 4 and
avoid material damage
→
Page 11 be aware of your appli-
to use safely.
¡ Use the dosing aid for liquid
Do not use gel-type detergents,
washing powder, switched on
prewash or ready-in time.
3.
To resume the program after the
desired soaking time, press
.
Start/Refill
13.10 Adding laundry
Remark: Take the information on the
topic of safety → Page 4
and avoid material damage
→
Page 11 take care of your device
to use safely.
Required: Inform yourself about the
optimum dosage for detergents and
care products.
1.
Press Start/Refill
.
1.
Pull out the detergent drawer.
The appliance pauses and checks
whether it is possible to add or
remove laundry. Note the
program status.
2.
Fill with detergent.
→
"Detergent drawer", Page 20
3.
If desired, fill with a care product.
2.
Remove or refill laundry.
4.
Slide in the detergent drawer. 3.
Close the door.
4.
Press Start/Refill
.
13.8 Starting the program
Remark: If you want to change the
time until the program end, first set
the ready-in time.
▶
on Start/Refill to press.
41