NL Set up and connect
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
1.
Plug the mains plug of the
appliance's mains cable into a
mains socket in the vicinity of
the appliance.
The connection data of the device
can be found in the technical data
2.
Check the mains plug for tightness.
All appliance feet must be firmly
planted on the floor.
3.
Tighten the lock nuts against the
housing with an open-end
wrench SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.7 Connecting the appliance
electrically
Remark: Take the information on the
topic of safety
Page 11 take care of your device
to use safely.
18
