NL Set up and connect
2.
Loosen and remove all bolts of the
4 transport locks with a SW13
open-end wrench
.
5.
Install the 4 cover caps.
6.
Push the 4 cover caps down.
3.
Pull the mains connection cable out of the
holder.
4.5 Connecting the device
4.
Remove the 4 sleeves.
Connect water supply hose
Remark: Take the information on the
topic of safety
Page 11 take care of your device
to use safely.
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶
The electric Aquastop valve
do not immerse in water.
16