Siemens WM14T780ME Instruction Manual And Installation Instruction Download Page 34

Page: 34 / 48

Operating the appliance

Switch the appliance on again if

necessary. The

and

symbols will

flash. If the symbols are off, the door

can be opened.

Programme end during rinse

hold

The

‹

indicator flashes in the display

panel, and the preset spin speed and

remaining programme length are

displayed for the selected programme.

Continue the programme by:

■

Touching

‹

on the control panel or

■

Changing the spin speed and then

touching

‹

■

Selecting the Less iron

setting

and then touching

‹

■

Turning the programme selector to

Empty

and then touching

‹

Programme end

End

lights up in the display panel and

the

‹

and

displays are off.

Note:

If the

display flashes, this

informs you to run the

Drum Clean

programme or any other programme

at a washing temperature of at least

60 °C.

Removing laundry/switching

off the appliance

Open the loading door and remove

the laundry.

Switch off the appliance.

Turn off the tap.

Note:

Not required for AquaStop

models.

Notes

■

Do not leave any items of laundry in

the drum. They may shrink in the

next wash or discolour another item.

■

Remove any foreign objects from the

drum and the rubber seal – risk of

rusting.

■

Wipe the rubber gasket dry.

■

Leave the washing machine door

and detergent drawer open so that

any residual water can dry away.

■

Always wait for the end of the

programme, otherwise the appliance

may still be locked. Then switch on

the appliance and wait for it to

unlock.

Summary of Contents for WM14T780ME

















































Search results

Summary of Contents for WM14T780ME

Reviews:

Related manuals for WM14T780ME

Brands by name

Popular brands

Siemens WM14T780ME, Instruction Manual And Installation Instruction

Search results

Summary of Contents for WM14T780ME

Reviews:

Related manuals for WM14T780ME

Brands by name

Popular brands